A bow is basically a weapon that is used for shooting arrows. There are different types of bows including: trainer, recurve, longbow, Mongolian and compound. All these differ according to different characteristics. Let’s cut the chase to the compound bows.
Compound bows are designed in such a way that its properties of the length (shorter) and high speed make it simpler to use and with accurate shots. The compound bows have different parts with different functions and or are dependent on each other for effective archery. These parts include:
Arrow shelf
This is a flat radius part of the bow at the sight window where the arrow rests in all its stages of shot. It is designed to protect the hand when holding the bow.
Arrow rest
It offers a platform for the arrow to rest on before and during the shot. This platform is provided due to its attachment to the riser through the Berger hole. Making it an effective catch for the arrow to rest on.
Berger hole.
This is the hole in which the arrow rest is attached via the riser. This enables the archer to have the arrow at the core when setting up the bow. The centralized mode is of standard measures for proper archery.
Bow string.
The bow string is the string attached from one cam end to the other. The string is elastic to enable the archer to draw the bow and thus aim accurately at the target to enable a successful shot.
Brace height.
This is the distance from the braced bow string to the point of the bow’s grip. The brace height is approximately 7 inches. The brace height dictates how closer the string will be to the grip point. The closer the string is to the grip the more the speed and thus the more accurate and easier to shoot.
Cables.
The cables of the compound bows are attached from one end of the upper limb to the other end of the cam. When drawing the bow the cables compress the limbs thus increasing energy for execution of the arrow.
Cams
This is the part where the compound bow string and the cable attach. It allows for turning when the bow is drawn thus allowing the archer to hold the bow’s total weight at any portion. They also transfer the limbs energy to the strings.
Cable guard.
The cable guard runs perpendicularly from the riser to the bow string and it keeps the strings to one side to allow a clear arrow passage.
Cable slide.
The cable slide clutches the cables together thus allowing for the sliding effect along the cable guard when the archer draws and releases the bow.
Stabilizers.
These are rods with varying lengths which, when the bow is released they counter balance the weight of the bow when it’s drawn.
Limbs.
The limbs are flexing points which allow for energy build up needed for a shot when the bow is drawn. They are attached to the riser.
Riser.
This is the par where all the limbs and other accessories attach to allow for proper drawing of the bow with accurate shots.
The Grip.
The compound bow grip is the part where the archer holds on to when drawing and releasing the bow for a shot.
Peep sight.
The peep sight of a compound bow is a rounded shape rear sight device that is inserted between the strands of the bow string which allows for alignment with the front sights when the archer is viewing through the peep sight.
Sight.
The bow sight is attached to the riser on the front of the bow. The bow sight has a pin that allows for a pinpoint accuracy when aiming for a shot.
Idler wheel.
It acts as a pulley since the string passes over it from the upper limb to the lower cam.
String vibration arrester.
This is a string attached to the riser ends and is responsible for absorbing vibrations which are transferred from the string when the bow is released for a shot.
Nock
This is the part of compound bows where the arrow attaches to the string. This knock gives a knocking point where the arrow assumes an accurate shooting position.
Fletchings
These vanes that are plastic or feather made and are attached to the arrow end. These vanes steer and directs the arrow for an accurate shot when on the flight. The bigger the vanes the higher lower the speed and the smaller the vanes’ size the higher the speed.
D-Loop.
This is a compound bow part that surrounds an arrow at the string. It initiates a mechanical energy when the bow is drown and released since it’s a connection point.
Compound bows are at far much easier to use, faster and with surety of accurate shots. They only require proper maintenance and there in will server an archer’s needs excellently. For more information on Best Compound Bow Reviews, check our website.
